| Item | Price | Shipping | Description |
| "u"-Bracket |
$35.00 |
$5.00 |
This black powder coated bracket replaces the stock bracket that comes with the phid lights. Allows the light to mounted either above or below the bracket on the bike. increase the ability to adjust the light and gives the light a rock solid mount. |
| 1/4"Pipe to 5/16" Hose Barb |
$8.00 |
$5.00 |
Solid brass fitting in either straight or 90 degree configration. |
| 5/16" Hose Barb Tee |
$8.00 |
$5.00 |
This fitting allows adding an aux tank feed line to either a cross over line on the main tank. Or a tie in point to the carb. |
| Bulk Head Fitting |
$8.00 |
$5.00 |
This bulk head fitting allows installing a supply line in to a main tank. They have female 1/4" pipe thread that allow a varity of hose barb sizes to be used. |
| Cleanable See Through Filter |
$15.00 |
$8.00 |
This filter can be disassembled to allow cleaning of the replacable filter element. being able to see the flow through the filter helps eliminate questions about if the fluid is flowing. |
| Flush Filler |
$35.00 |
$8.00 |
Flush-mounted fuel tank cap. |
| Flush Mount Filler Gasket |
$10.00 |
$5.00 |
Replace the oem gasket with an industrial strength upgrade. |
| Harley Dash Shelf |
$80.00 |
$8.00 |
Put that gps, radar detector, mp3, or various other items up in the line of site for eaiser use and view. Shelf is black powder coated. Installing is quick and easy. |
| Harley Davidson Aux Tank System |
$850.00 |
$35.00 |
The tank mounts to the passanger grab rails. provides for no loss of existing storage space. Will work with injected or carbrated engines. All componets are black powder coated and use stainless steel fastners. This set up arrives with all parts need to install. Designed for the ultra classic series. And may work with other models. |
| Harley Light Bracket |
$85.00 |
$8.00 |
Mounts to the standard light bar on many different models of Harley Davidson. the bracket will accept various single post mouted lights as well as several plate mounted brands of lights as well. comes with required mounting bolts in stainless steel. black powder coated. |
| Hold Down Straps |
$3.00 |
$5.00 |
3/4" x 6' black nylon with quick disconnect buckle. These straps can be used for many areas where you want a secure hold down. Pack small and just seem to create a use for themselves. Price listed is each. |
| Hose Clamp |
$1.10 |
$5.00 |
These clamps will give years of trouble free service. Can be used with socket, wrench, or screw driver. Being stainless steel for corrosion resistance. Price listed is each. |
| K1100LT Dash Shelf |
$80.00 |
$8.00 |
Shelf mounts to existing mounting points, is black powder coated. It includes all parts need to mount to the bike. Including stainless steel fastners where needed. Does not interfere with opperation of the electric windsheild. |
| K1200LT Rear Mount Tank |
$975.00 |
$35.00 |
This black powder coated tank mounts in place of the rear fender. It does require the addition of mounting tabs be added to the frame. Easy removal for changing tires, or other service work. Requires a pump for transfer. |
| KLR650 Aux Tank System |
$725.00 |
$35.00 |
Pillion mount black powder coated system uses existing mounting location with stainless steel fastners provide where required. Includes all parts required for installing. Adds that extra range to get you to those roads less traveled. |
| KLR650 Light Brackets |
$85.00 |
$8.00 |
These black powder coated brackets mount added light up in an area the provide optium illumination for the riders view.
For those after dark rides. |
| R1100 / 50 RT Aux Tank System |
$875.00 |
$35.00 |
This system mounts to an oem rear seat pan. All metal componts are black powder coated. Will work with gravity or pump feed. The system arrives with all parts required for installing. |
| R1100R Aux Tank System |
$875.00 |
$35.00 |
This system mounts to an oem rear seat pan. All metal componts are black powder coated. Will work with gravity or pump feed. The system arrives with all parts required for installing. |
| R1150GS Aux Tank System |
$875.00 |
$35.00 |
This black powder coated stystem works with either gravity or pump transfer. Is pillion mounted to allow for quick on and off. The system includes all parts required to mount on the bike. |
| R1200GS Aux Tank System |
$875.00 |
$35.00 |
This pillion mount black powder coated system includes all parts for mounting to the bike. Just remove the rear half of the saddle, and clip this set up in place. Due to the angle of the frame on this bike. When using this system you gain storage for the small frequently used items. Will work with gravity or pump feed. |
| Resivor Mounted Switch Boxes |
$65.00 |
$5.00 |
These black powder coated fabricated switch boxes place switches, heat controllers, etc. in a convient location. Stainless steel fastners are included. These fit various model bikes. |
| ST1300 Aux Tank System |
$875.00 |
$35.00 |
Designed to be mounted to an oem rear seat pan. This black powder coated system includes all parts required to install. your choice of flush or twist on filler cap. |
| ST1300 Dash Shelf |
$80.00 |
$8.00 |
Aluminum Dash Shelf to hold various items on your ST1300's dash area. Comes with all attachment hardware. Power-coated black. |
| ST1300 Dash Shelf |
$80.00 |
$8.00 |
Designed for abs or non abs bikes. With or without electric windsheild. Black powder coated with all stainless steel fastners. And does not require any cutting of the body work to install. |
| St1300 Fork Mount Light Bracket |
$85.00 |
$8.00 |
These black powder coated brackets mount where the current reflector is located on the forks. various style lights can be mounted on them. Great for adding marker or fill lights. |
| ST1300 Light Bracket |
$95.00 |
$8.00 |
These black powder coated brackets allow mounting of various style of lights. They do not require any cuting of the body work to install. the stainless steel mounting bolts are included. |
| Stat-O-Seal |
$8.00 |
$5.00 |
This washer like seal adds that extra security to the inside of a bulk head fitting when installing in the main tank. |
| Supply Line |
$1.25 |
$8.00 |
This 5/16" line is rated for all pump fuels. Price is per foot. |
| Supply Line or Vent Fitting |
$8.00 |
$5.00 |
These fittings are 1/4" pipe by 5/16" hose barb. They are of solid block brass design for extreme service. |
| Supply Line Quick Disconnect |
$20.00 |
$5.00 |
Designed to allow quick disconnect of 5/16" lines. Internal
sealing when disconnected provides a leak free fitting. Comes
with both male and female sections. |
| Twist Filler |
$35.00 |
$8.00 |
Conventional twist-type gas filler cap |
| Vent Line Quick Disconnect |
$8.00 |
$5.00 |
No more fussing with hose clamps with this quick discnnect of our design. It allows the bike side of the vent line to remain attached when removing an auxillary tank. Extremely easy to install and use. |
| V-Strom DL-1000 Aux Tank System |
$875.00 |
$35.00 |
This black powder coated system includes all parts required for installling. It is a pillon mount design. Allows for the mounting brackets to remain on the bike when tank is removed. It will work with gravity or pump feed. your choice of flush or twist on filler cap. |
